The Micro PDB has been engineered to provide the highest possible performance and reliability in a 32*22mm & 4 layers PCB. It distributes power from a battery pack to 4 ESCs, as well as providing dual synchronised & regulated DC outputs for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a very compact solution to achieve 2A continuous output current over a wide input supply range(3S to 5S LiPo)

2oz copper & 4-layers PCB. ESC & Battery solder tabs in pairs 5V & 12V Output LED indicators & Short circuit tolerant Micro size & lightweight General: - Input voltage range (3S-5S operation): 7 - 21V DC - Regulated 5V and 12V outputs - LED power indicators ( 5V & 12V outputs ) - 4 ESC outputs ESC outputs: - Continuous current: 20A per output - Peak current (10 seconds/minute): 25A per output BEC 5V output: - Designed for RC Receivers, Flight controllers, OSD, and Servos. - DC/DC synchronous buck regulator. - Voltage: 5.0 +/- 0.1VDC - Continuous current: 2 Amps (Max.2.5A 5s/minute) - Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) - Short-circuit tolerant (5 seconds/minute) BEC 12V output: - The battery should be 4S~5S LiPo (12.8~21V DC) - Standard output designed to power cameras and video transmitters,etc. - DC/DC synchronous buck regulator, Efficiency is up to 96%. - Voltage: 12.0 +/- 0.2VDC - Output Ripple: 20mV (VIn=16V, VOut=12V@2A Load) - Continuous current: 2 Amps (Max.2.5A 5s/minute) - Short-circuit tolerant (5 seconds/minute) BEC 12V @ 3S LiPo - Output voltage= 3S LiPo voltage x 95% Physical: - Dimensions: 32 x 22 x 3 mm - Weight: 3.5g